Model Number: CH-06013
Brand Name: Heatfounder
Key Specifications/Special Features:
Customized made stainless steel sheath electric cartridge heaters for any application220V cartridge heatersare a versatile and economical heat source for a wide variety of industrial and commercial applicationsStandard tube diameters are 6, 8, 10, 12 and 16mm, but other special sizes are available for electric cartridge heater 12VDepending on the diameter, lengths can be supplied up to 3000mmStandard sheath materials are stainless steel 201, 304, 316 and 321, but special sheath materials may be available based on diameter and size of the element requiredElectric cartridgeheater with metal sheathprovide superior heat transfer, uniform temperatures, resistance to oxidation and corrosion and long life even at high temperaturesFlexible lead wire extensions or other mounting options are available for specific applicationsTube diameter: Φ6-Φ30mm
Tube material: SS201, SS304, SS316, SS321 and INCOLOY 800
Insulation material: MgO
Conductor material: nichrome resistance wire
Wattage density: high/middle/low (5-25W/cm2)
Lead connection option: threaded stud terminal or lead wire
Lead wire type: 300mm standard (Teflon/silicone high temperature fiberglass are available for electric cartridge heater 3D printer)
| Heat intensity |
not exceeding 30W/cm2 (advisable) |
| Power |
depends on the dimension |
| Exhaust extreme (when cold) |
<=0.1mA to 242V |
| Insulation (when cold) |
5 min ohms 500W minimum |
| Dielectric strength |
1500V/1/sec |
| Working temperature |
650°C max |
| Length tolerance |
±1.5% |
| Diameter tolerance |
-0.02 to -0.06mm |
| Cut off connection tolerance |
±15 mm |
| Power tolerance (W) |
+5 %-10 % |
| Cold areas |
depends on length and diameter 5-25mm |
By certification [File Integrity]
